Printronix SL5000r User Manual page 220

Chapter 3
Emulation Submenus
LPI
This item selects the number of lines printed per inch.
The range is 6-10, and the factory default is 6.
Max PI 16
•
Enable. A paper slew of 0-15 will move 1-16 lines.
•
Disable. A paper slew of 1-15 will move 1-15 lines. A paper slew of 0 will
always move 1 line.
The factory default is Enable.
Max. Print Width
Set the maximum print width the printer will print when using a C/T or TN5250
host interface. Set for 13.2 inches when printing files larger than the width of
the printer. All data exceeding the width of the maximum Printer Width will be
truncated.
•
13.2 inches
•
Printer Width (the maximum width of the printer)
The factory default is 13.2 inches.
Midline PY (includes ^PN)
•
Disable. The Graphics mode Enabled command, ^PY, must be the first
three characters of a line.
•
Enable. The ^PY or ^PN can occur anywhere in a line.
The factory default is Disable.
NL at MPP+1
Specifies the linespacing action when the printline exceeds the rightmost print
position and text continues from the leftmost print position on a new line.
•
On (the default). Moves to the first print position two lines down from the
current position.
•
Off. Moves to the first print position of the next print line.
Null Handling
This item allows the printer to either treat nulls as blank spaces or ignore
them. If nulls are ignored, the print position does not move.
•
Space (the default). Treats nulls as spaces.
•
Ignore. Ignores nulls.
220