Printronix SL5000r User Manual page 335

Table 17. LCD Message Troubleshooting (continued)
Displayed Message
LOADING
PROGRAM
FROM PORT XX%
LOADING
PROGRAM
INTO FLASH
MENU MODE
QUICK SETUP
INCOMPATIBLE
WITH CUTTER
Can User
Explanation
Correct?
Yes The new emulation
program is loading into
printer RAM. XX%
indicates how much of
the program has
loaded.
Yes A program is getting
loaded into flash.
Yes Normal message that
displays when you first
press the MENU key to
place tje printer in
Menu mode when no
validator option is
installed.
Yes Tear-Off or Peel-Off
Media Handling
selection was
attempted with the
cutter option still
installed. These modes
require that the front
door assembly be
installed to use the
Label Taken Sensor.
Fault Messages
Solution
No action required.
No action required.
No action required.
1. Select a different Media
Handling Mode.
2. Power off the printer and
remove the cutter option,
install the front door
assembly, power on the
printer and select Tear-Off
or Peel-Off Mode.
335