Printronix SL5000r User Manual page 233

Typeface
•
Letter Gothic (the default). Letter Gothic is a non-proportional font where
all of the characters take up the same amount of space when printed.
•
Courier. Courier is a non-proportional (monospaced) font where all
characters take up the same amount of space when printed.
•
OCR-A / OCR-B. Optical character recognition fonts printing at 120 dpi
horizontally and 144 dpi vertically. Both fonts print only at 10 cpi.
Uniform Fonts
•
Disable (the default). The typeface selected while in Extended Graphics
Mode will be cancelled when the graphics pass is complete.
•
Enable. The typeface selected while in Extended Graphics Mode will also
be used in Standard Graphics Mode and Normal Mode.
UPC Descenders (PGL)
This parameter allows you to print bar code descenders when human
readable data is not presented in the UPC/EAN bar codes.
•
Always (the default). UPC/EAN bar codes are printed with descenders,
even if there is no human readable data.
•
Never. UPC/EAN bar codes are printed without descenders if the PDF
command is present.
•
Only With PDF. UPC/EAN bar codes are printed with descenders only
when the PDF command is presented.
UPC Descenders (VGL)
•
Enable (the default). UPC/EAN bar codes are printed with descenders,
even if there is no human readable data.
•
Disable. UPC/EAN bar codes are printed without descenders if there is
no human readable data.
Upr. Case Select
Controls how the printer handles lowercase characters it receives from the
host computer. When enabled, all characters are printed in uppercase.
•
Disable (the default). Prints lowercase characters received from the host
computer as lowercase; prints uppercase characters received from the
computer as uppercase.
•
Enable. Prints lowercase characters received from the host computer as
their corresponding uppercase equivalents; prints uppercase characters
received from the computer as uppercase.
Emulation Submenus
Overview
233