Bottom Margin - Printronix SL5000r User Manual

Barcode Errors
•
Enable. An error message will print when invalid bar code data is
encountered.
•
Disable. VGL will not print an error for illegal bar code data; the bar code
will be skipped.
NOTE: When Barcode Errors is disabled, the VGL emulation will try to make
the best use of invalid data by either truncating extra digits or adding
zeros to the end of bar code data to meet minimum data length
requirements for some bar codes. Not all errors will be corrected.
The factory default is Enable.
Barcode var.
This command only applies for IBARC barcode command format.
•
Low Resolution. Sets barcode ratio dot values to be interpreted as line
matrix printer dots (60 x72).
•
High Resolution. Sets barcode ratio dot values to be interpreted as print
engine dots (300 x 300 or 203 x 203).
The factory default is Low Resolution.
Bold
•
Disable. Text is printed normally.
•
Enable. Text is printed with a heavy line thickness.
The factory default is Disable.

Bottom Margin

Defined in linespaces, starting from line zero at the bottom of the page and
incrementing from the bottom up.
The range is 0-451 linespaces, and the factory default is 0 linespaces.
Boundary Check
This option turns on or off the page boundary check for all print elements.
•
Enable. When enabled, an out of bound error is reported if the print
element is out of the page boundary.
•
Disabled. When disabled, no out of bound error is reported. The out of
bound print element prints over the page boundary.
The factory default is Enable.
Emulation Submenus
Overview
195