Loading Media In Cutter Mode (Option) - Printronix T600 Administrator's Manual

3.4.4 Loading Media in Cutter Mode (Option)

3. Close the printer cover.
4. Use "Configuration Utility" or LCD menu function to enable the cutter mode.
For Configuration Utility:
Start the "Configuration Utility"  Select the "T6X0" in the list  Click the "Printer Configuration" button 
Select "CUTTER" for Post-Print Action on "Basic" tab  Click "Set" button
5. Use "Configuration Utility" or LCD menu function to set the media sensor type and calibrate the
selected sensor.
For Configuration Utility:
Start the "Configuration Utility"  Select the "T6X0" in the list  Click the "Printer Function"
button  Click the "Calibrate" button  Select media sensor type and Click the "Calibrate" button
Printer function button:
6. Press the FEED button to test.
Note:

Please calibrate the gap/black mark sensor when changing media.

Please refer to the section 6 for LCD menu function.
1
- 23 -
1. Please refer to section 3.3.1 to load
the media.
2. Lead the media through the cutter
paper opening.
2
3
P180043-001_A