Change Case - Printronix SL5000r User Manual

Cancel IGP/DCU
•
Enable. Cancels all buffers when a job is put on hold from the host or
when the CANCEL key is pressed.
•
Disable. Does not cancel any internal buffer in the printer when a job is
put on hold from the host, or when the CANCEL key is pressed.
The factory default is Enable.

Change Case

Specifies the font as Mono or Dual Case. This option is available only in Coax
non-SCS mode. The host will be notified of the change when the printer is put
online. Mono Case prints the same as Dual Case if the character set is one of
the following "right to left" sets: Katak, Hebrew, Old Hebrew, and Farsi.
SCS (Systems Network Architecture Character String) Mode is controlled by
the host computer.
The options are Dual Case (the factory default) and Mono Case.
Emulation Submenus
Overview
197