Saving A Configuration - Printronix SL5000r User Manual

Chapter 3
Overview
3. When the desired submenu displays, press the
through the values or options.
4. Press the ↵ key to select a value. An asterisk (*) displays next to the
selected value or option.
5. If there are more submenu values or options you want to change, use the
. .
.
any time, you may press the
6. At any time, you may press the PAUSE key twice to exit the Configuration
menu and place the printer online. Once you have finished selecting all
your options, save your configuration.
IMPORTANT
If you do not save your configuration, all your new values will be lost
when you power off the printer.

Saving A Configuration

You can save up to eight different configurations to meet eight unique print job
requirements. These configurations are saved and stored in the printer and
are not lost when the printer is turned off.
NOTE: If the Protect Configs. option is enabled, the new configuration will not
Follow these steps to save a new configuration:
1. Press the
MENU MODE
CONFIG. CONTROL
2. Press the ↓ key until the following message displays:
Save Config.
1*
3. Press the
is not listed, because no changes made to the factory configuration can
be saved under Factory.
4. When the desired number displays, press the ↵ key to select it. The
following message displays briefly:
Saving
Configuration
When processing is completed, the display shows:
Save Config.
X *
88
,↑, ↓, +, and − keys to access the value and the ↵ key to select it. At
be saved until the existing configuration is deleted.
. .
key until the following message displays:
.
or − key to cycle through the options (1-8). Note that "Factory"
+
or − key to scroll
+
. .
key to return to the Main menu.
.