Printing With Printer Ecm/Ekc - Kyocera KM-8530 User Manual

Printing with Printer ECM/EKC

If the Printer ECM/EKC has been set, perform the following steps to print or copy.
1.
Select the [Paper] tab in the printer driver properties window, and click
the [Settings] button.
The [Password Print] dialog will appear.
2.
Type the User ID set in the Printer ECM/EKC into the [User ID] text box.
• With some application software, the setting for the printer driver also is saved. When you
use [Settings] to print a shared file on a network or a file likely to be printed by other's,
delete the [UserID] and [Password] before saving the files.
• You must enter the same password (8 digits or less) in the [User ID] text box that is set on
the copier for Printer ECM/EKC.
• When in doubt about the password for Printer ECM/EKC, ask your system administrator.
• If you do not enter the correct password or if you leave the [User ID] text box blank, the print
job could be performed or not performed.
• If not performed, it is registered as a non complete job.
• In the service mode, you can set whether or not to print these jobs.
• For more information, contact your Kyoceramita service representative.
3.
Click [OK] button to close the [Properties] and start the printing pro-
cess.
Chapter 8 Managing the Number of Prints
423