To test printing to check the settings (Continued)
●
Operating procedures of
Limitation
[Wait with Proof] cannot be set in the following case:
• When [Group] is selected in [Device Options] tab - [Collate]
If you attempt to make a setting corresponding to the incongruous combinations described that cannot be set on
the printer driver, a message will be displayed. Check the details of message and adjust the relationship with other
settings.
1.
Open [Device Options] tab of [Properties] window.
When displayed from an application of Windows 98.
•
For Windows NT4.0, the [Advanced] tab is displayed.
•
For Windows 2000/XP, on the [Properties] window, click the [Advanced ...] button.
2.
Select [Wait Mode] in the [Printer features] field.
3.
Click the [▼] button besides the [Printer features] - [Change settings
for] box to display the list. Then select [Wait with Proof] from the list.
The default is [None].
4.
Click the [OK] button and close the [Properties] window.
5.
Print form the application.
6.
The [Printer Check Mode Screen] will appear on the LCD Touch Screen
and one set of copy for proofreading will be printed.
Adobe PS3
321
Chapter 5 Printing from Windows