Kyocera KM-8530 User Manual page 240

To set the Punch Unit (Continued)
●
Operating procedures of
1.
Open [Device Options] tab of [Properties] window from the [Printers]
window.
When displayed from the [Printers] window with Windows 98.
For Windows NT4.0/2000/XP, open [Device settings] tab of the [Properties] window from the [Printers] window.
2.
Select [Punch Unit] from the [Installable options] field.
3.
Click the [▼] button beside the [Installable options] - [Change setting
for] box to display the list. Then select a [Punch Unit] you want to use
from the list.
When the copier is provided with an optional punch unit, select either [PU-108] or [PZ-108].
When the copier is not provided with an optional punch unit, select [None].
•
The default is [None].
•
When it is not known whether a punch unit optionally loaded to the copier is [PU-108] or [PZ-108], contact the
administrator.
4.
Click the [OK] button to close the [Properties] window.
Adobe PS3
240
Chapter 5 Printing from Windows