Connecting the copier
Connect the copier to the computer or the network after preparing the items required for the setup.
The following two connection types are available:
●
Parallel connection
This is the connection type to directly connect this printing system to the computer with a parallel cable.
Connect the parallel connecter at the back of this printing system to the parallel connecter at the back of the
computer directly with the parallel cable.
(p.29) Parallel Connection
Reference
●
Ethernet connection
This is the connection type to take if you want to use this printing system on the network.
Connect the Ethernet connector (8-pin modular connector) on the optional network interface card at the back
of this printing system to the network with the Ethernet cable.
(p.30) Ethernet Connection
Reference
41
Chapter 4 How to Setup