Kyocera KM-8530 User Manual page 262

To save and print a print job (Continued)
4.
When changing the Job ID, or when creating a new Job ID, enter a new
Job ID (up to 8 digits) in the [Job ID] box.
A Job ID that has already been set is cancelled when a new Job ID is entered, and the new one
becomes valid.
When a [Job ID] overlaps with a saved [Job ID], the copier automatically adds a number to the last digit of the [Job
ID], and identifies it as a different [Job ID].
5.
When changing the password, enter a new password (up to 8 alphanu-
meric characters) into the [Password] box.
A password that has already been set is cancelled when a new password is entered, and the new one
becomes valid.
6.
Click the [OK] button.
The [Image Storage] dialog box disappears and the display returns to the [Properties] window.
7.
Click [Store] or [Store and Print].
When [Store] is turned on, a print job can be saved into the hard disk of the copier. The printing of the
saved print job is made through the control panel of the copier as needed.
When [Store and Print] is turned on, it is possible to save a print job into a hard disk contained in the
copier and print it.
8.
Click the [OK] button to close the [Properties] window.
Before printing with the application, you can change [Job ID] and [Password].
(p.263) To re-set a Job ID
Reference
9.
Print with the application.
The operations on and after this section are made through the control panel of the copier.
Chapter 5 Printing from Windows
262