To Set The Punch Unit - Kyocera KM-8530 User Manual

To set the Punch Unit

compliant
Adobe PS3
Set the copier to recognize an optional punch unit if it is installed on the copier.
When the printer driver recognizes a punch unit [PU-108], the output paper can be processed with double
punching. Also, when the printer driver recognizes a punch unit [PZ-108], the output paper becomes possi-
ble to be folded in a Z-form.
Punch unit
Even if a punch unit is installed on the copier, the printer driver will not recognize the unit if an
Finisher is not set on the printer driver.
●
Operating procedures of
1.
Open [Configure].
2.
Click the [▼] button beside the [Punch Unit] in the [Installable Options]
dialog box to select the punch unit you want to use from the list.
When the copier is provided with an optional punch unit, select either [PU-108] or [PZ-108].
When the copier is not provided with an optional Finisher, select [None].
•
The default is "None". If "None" is selected, you cannot set the punch unit
•
When you do not know whether the optional punch unit is PU-108 or PZ-108, consult your system administrator.
3.
Click the [OK] button to close the [Configure].
Adobe PS3
386
Chapter 6 Printing from Macintosh