To Set A Thick Cover - Kyocera KM-8530 User Manual

To set a Thick Cover

PCL5e
Output a thick paper as a cover, which is different from the output paper set.
To set a cover, options have
to be selected as shown in
the illustration below.
Sheet Feeder
The copier shown in the illustration has been provided with
all options.
Important
The settings made in the [Properties] window that is opened from the [Printers] window are
applied to all applications.
Set a cover sheet feeder on the [Properties] window displayed from [Printers] window;
For Kyoceramita PCL5e, select [Setup] tab - [Options], and for Adobe PS, select [Device
Options] tab - [Installable Options].
●
Operating procedures of
Limitation
[PI Cover Sheet] cannot be set in the following cases:
• When [PI-108 Sheet feeder] is not available in [Setup] tab.
• When [OHP-Interleave(Blank)] or [OHP-Interleave(Print)] is selected in [Paper] tab - [Media
Type]
• When [Sub Tray] is selected in [Paper] tab - [Output Tray]
If you attempt to make a setting corresponding to the incongruous combinations described that cannot be set on
the printer driver, a message will be displayed. Check the details of the message and adjust the relationship with
other settings.
Compliant
Adobe PS3
Output Tray - Sub Tray
PCL5e
229
Chapter 5 Printing from Windows