Kyocera KM-8530 User Manual page 163

To set the type of manual-feed paper (Continued)
●
Operating procedures of
Limitation
[OHP] cannot be set in the following cases:
• When [Duplex] is available in [Paper] tab
• When [Fold, Stitch] is available in [Device Options] tab - [Printer features]
• When [Combination] is available in [Device Options] tab - [Printer features]
[OHP(interleave)] cannot be set in the following cases:
• When [Duplex] is available in [Paper] tab
• When [Fold, Stitch] is available in [Device Options] tab - [Printer features]
• When [Combination] is available in [Device Options] tab - [Printer features]
• When [Group] is selected in [Device Options] tab - [Printer features]-[Collate]
[Tabbed sheet] cannot be set in the following cases:
• When settings other than [Letter, Tabloid, A3, A4, B4, B5] in [Paper] tab - [Paper size]
• When [Fold, Stitch] is available in [Device Options] tab - [Printer features]
If you attempt to make a setting corresponding to the incongruous combinations described that cannot be set on
the printer driver, a message will be displayed. Check the details of message and adjust the relationship with other
settings.
1.
Open [Paper] tab of [Properties] window.
When displayed from an application of Windows 98.
•
For Windows NT4.0, the [Advanced] tab is displayed
•
For Windows 2000/XP, the [Paper/Quality] tab is displayed.
2.
Click the [▼] button beside the [Paper type] box to display the list.
Then select a paper type you want to use from the list.
•
The default is [Plain Paper].
•
The name of the setup item for Windows NT4.0 / 2000/XP is [Paper type] --> [Media].
3.
Click the [OK] button to close the [Properties] window.
Adobe PS3
163
Chapter 5 Printing from Windows