To set a Back Cover (Continued)
●
Operating procedures of
Limitation
[Back Cover] cannot be set in the following cases:
• When [OHP-Interleave(Blank)] or [OHP-Interleave(Print)] is selected in [Paper] tab - [Paper
type]
• When [Group] is selected in [Device Options] tab - [Collate]
• When [Combination] is available in [Device Options] tab
If you attempt to make a setting corresponding to the incongruous combinations described that cannot be set on
the printer driver, a message will be displayed. Check the details of the message and adjust the relationship with
other settings.
1.
Open [Device Options] tab of the [Properties] window.
When displayed from an application with Windows 98.
•
For Windows NT4.0, the [Advanced] tab is displayed.
•
For Windows 2000/ XP, the [Properties] window (detailed setting) is displayed.
2.
Select [Back Cover] from the [Printer features] field.
3.
Click the [▼] button beside the [Printer features] - [Change setting for]
box to display the list. Then select [Blank] or [Printed] from the list.
When [Blank] is selected, nothing is printed on the front cover.
When [Printed] is selected, the front cover is also printed.
The default is [None].
4.
Select [Back Cover Tray] from the [Printer features] field.
Adobe PS3
224
Chapter 5 Printing from Windows