Kyocera KM-8530 User Manual page 530

Setups on the Control Panel (Continued)
●
NetWare Setup
Lets you set for printing with NetWare.
The Network Interface Card takes long to start up if Novell NetWare is not a primary protocol
and NetWare is enabled.
Be sure to select [No] to disable NetWare in an environment where Novell NetWare is not
used.
Enable NetWare
Lets you set whether NetWare is available or not. The default is [YES].
Server Name
Lets you enter the name of the NetWare print server.
• A maximum of 47 characters of symbols and alphanumeric characters is available.
Server Password
Lets you enter a password for the NetWare print server.
• A maximum of 31 characters of symbols and alphanumeric characters is available.
530
Chapter 19 Copier Setup