Kyocera KM-8530 User Manual page 326

To check the current settings before printing (Continued)
6.
The settings are displayed on the LCD.
The [Printer Check Mode Screen] will appear on the LCD Touch Screen and no printing is performed.
[HDD STORE] appears only when the optional HDD is installed in the main body printer.
7.
Confirm the current settings.
8.
Change setting values of [Print Quantity], [Duplex Mode] or [Image
Shift], if necessary.
• How to change [Print Quantity]
Enter the value from the keypad on the Control Panel of the copier when the [Printer Check Mode
Screen] appears.
• How to change [Duplex Mode]
To show the [Basic Screen], touch the [Duplex Mode]. Set the [Duplex Mode] on the [Basic
Screen]. To return to the [Printer Check Mode Screen], press the [CHECK] button on the Control
Panel of the copier.
• How to change [Image Shift]
Available only when On is selected in [Image Shift] of printer driver.
To show the [Image Shift Screen], touch the [Image Shift]. Set the [Image Shift] on
the [Image Shift Screen]. To return to the [Printer Check Mode Screen], touch
[EXIT] on the [Image Shift Screen].
9.
Touch the [PROOF PRINT] to print one copied set for proofreading, if
necessary.
10.
Touch the [Exit] and then press [Start] to resume the rest of the print
job.
Chapter 5 Printing from Windows
326