Installing To Windows Nt4.0 (Pcl5E) - Kyocera KM-8530 User Manual

Installing to Windows NT4.0 (PCL5e)

To install the Kyoceramita PCL5e printer driver to Windows NT4.0, perform the following steps. The installation
should be performed by a qualified system administrator or printer administrator.
●
Start the Add Printer Wizard
1.
Turn on the computer and start Windows NT4.0.
2.
Log on as an administrator (or a user entitled to install a printer).
3.
Click the [Start] button of the task bar. Then, select [Settings] of the
Start menu and click [Printers] from the sub-menu.
The [Printers] window will appear.
Exit from all active Windows applications, if required.
4.
Double-click the [Add Printer] icon of the [Printers] window.
The [Add Printer Wizard] window will appear to add the printer.
5.
Select [My computer] or [Network printer server].
When the printing system is directly connected to a computer in which the printer driver will be
installed, select [My computer]. When the printing system is managed in a computer in which the
printer driver will be installed, also select [My computer].
When personal computers or workstations are connected to the network and you want to print via the
network, select [Network printer server].
Tips
When using the network printer server, it is necessary to complete the network settings on the network interface
card and on the personal computers. For details, see your network administrator.
If your computer does not have the network setting, go to "When selecting [My computer]" step 1.
(p.57)
Reference
55
Chapter 4 How to Setup