Kyocera KM-8530 User Manual page 452

Scanner Basic screen (Continued)
●
QUALITY
Use this feature to select the resolution.
The default can be configured in the Key Operator mode.
For information about the Key Operator mode, refer to the "Copier's User's Manual."
The scanned data is read into the copier's memory (E-RDH). If scanned data exceeds the E-RDH capacity,
which translates into an error, you cannot continue with scanning.
The following table shows how many Letter/A4-size originals can be scanned with the copier's standard
memory (128 MB).
Resolution
200 dpi
300 dpi
400 dpi
600 dpi
•
Basic memory of copier vary depending on models of machine. For details, refer to the "Copier's User's Guide."
•
Data Size and No. of Originals available to be read depend on data actually scanned. Understand that the num-
bers in the table are intended only to serve as a rough guide for you.
●
[SPECIAL ORIGINAL] key
Touching the [SPECIAL ORIGINAL] key at the [Scanner Setting Basic] screen displays the [Special Original
Selection] screen.
(p.454)
Reference
●
[APPLICATION] key
Touching the [APPLICATION] key in the [Scanner Setting Basic] screen displays the [Application Selection]
screen.
(p.456)
Reference
Original Data Size
Text only About 70 KB
Text and Picture About 130 KB
Text only About 120 KB
Text and Picture About 210 KB
Text only About 200 KB
Text and Picture About 480 KB
Text only About 430 KB
Text and Picture About 1.43 MB
452
Chapter 12 Scanner Operation
No. of Originals
About 1780
About 860
About 1050
About 600
About 620
About 260
About 280
About 80