Scanner Basic screen (Continued)
●
LENS MODE
Touch this key to change the magnification ratio at which the original document is read.
You can select [ZOOM], [RE] or [1:1]. Touching the [ZOOM] or [RE] key pops up a screen at which you can
select the magnification ratio.
[RE] is the same as the default in the copy mode.
[ZOOM] range in each resolution are as follows:
• 200 dpi: 75% - 400%
• 300 dpi: 50% - 400%
• 400 dpi: 38% - 400%
• 600 dpi: 25% - 400%
The setting of [ZOOM] may vary depending on models of machine.
●
SCAN SIZE
Touch this key to select the scanning paper size.
You can select [AUTO] or [SIZE SETTING].
Touching the [SIZE SETTING] key pops up a screen at which you can select the scanning paper size.
[AUTO] : Same as the default in the copy mode
[SIZE SETTING] : For example, when an A3 original is loaded and you select B5, then the scanning takes on
the B5 frame.
Available paper sizes:
A3 / A4R / A4 / A5R / A5 / A6R / B4 / B5R / B5 / B6R / 11x17 / 8.5x14R / 8.5x11R / 8.5x11 / 5.5x8.5R /
5.5x8.5 / Full AREA
• Default is [AUTO].
The setting of available paper sizes may vary depending on models of machine.
Chapter 12 Scanner Operation
451