Kyocera KM-8530 User Manual page 553

Using IPX Peer-to-Peer (Continued)
●
Installation of IPX Peer-to-Peer
To install the IPX Peer-to-Peer, perform the following procedure:
1.
Insert the CD-ROM that came with the network interface card into the
CD-ROM drive.
2.
From the Windows main window, click on [Start].
3.
Click on [Run].
4.
From [Run], type <CDROM drive>:\IPX-P2P\SETUP.EXE.
5.
Click on [OK].
6.
At the [IPX Peer-to-Peer Setup] screen, click on [Next].
•
If setup detected a previous installation of the IPX Peer-to-Peer, it will prompt you to have Setup delete the old
driver and continue the installation procedure. Click on [Yes] or [No]. Once the IPX Peer-to-Peer is installed,
each printer on the network that supports this peer-to-peer capability will appear as a [Port] under [Printer Prop-
erties].
•
To use the Peer-to-Peer connection, create a logical printer using the [Add Printer Wizard] according to the
instructions for the print controller. Set up the printer as a [LOCAL] printer. Use the driver that came with the
print controller. When the [Add Printer Wizard] asks you to choose the [Port], select the name of the Peer-to-
Peer printer you wish to print to. When you complete the installation, select the [Print Test Page] option.
When uninstalling the IPX Peer-to-Peer, perform the following procedure.
1. Delete the printer using IPX Peer-to-Peer from the [Printer] folder.
2. Delete the [IPX-P2P] by using [Add/Delete Applications] from [Control Panel].
Chapter 20 Printing by IP Peer-to-Peer from Win-
553
dows 95/98/Me