Checking On Non Complete Jobs - Kyocera KM-8530 User Manual

Checking on non complete jobs

If print jobs are not output, you can check them on the Non complete Job List screen.
To get the Non complete Job List screen to appear:
1.
Press the [STATUS] key on the printer mode basic screen to get the
Job Status Screen to appear, and then press the [NON COMPLETE
JOB LIST] key.
The Non complete Job List screen will appear.
You can scroll the up/down with the [
●
Content of Non complete Job List
On the Non complete Job List, you can check on the mode, file and application names, as well as the causes
of non complete jobs.
Here is a list of Non complete Job List content.
Mode
PRINTER
SCANNER
•
When switching the copier's main power is switched OFF, the Non complete jobs in the Non complete Job List
screen are deleted.
•
Provided the Printer ECM/EKC feature has been set on the copier, [User ID] set up in the [Settings] dialog is
recognized as a password for Printer ECM/EKC.
•
Provided a Printer ECM/EKC feature has been set on the copier, you can enter the same number in the [User
ID] text box as that representing your password for Printer ECM/EKC.
] [ ] keys.
Factor
Cancel Stopped with STOP/CLEAR. Deleted from
Joblist. W/O key count/set. Interruption
request from print controller. Job aborted.
Prohibited by Web count. Copy prohibited
before examination. Error in memory.
ID Differ Job not output because User ID did not
match.
Limit over Job not output because Printer ECM/EKC
reached a preset limit.
Mem Full Job not output because copier ran out of
memory.
Error Job not completed in uploading data to hard
disk.
Cancel Stopped with STOP/CLEAR. Deleted from
Job List. W/O key count/set. Interruption
request from print controller. Job aborted.
430
Chapter 9 Troubleshooting
Description of causes