LPD/LPR Setup (Continued)
Adding Print Services for Unix
If [LPR Port] is not displayed at step 5 of "Adding a printer port", perform installation of print service for Unix.
1.
Click the [Start] button and select [Network and Dialup Connections]
from the [Control Panel].
For Windows XP, select [Start]-[Control Panel], and select [Network and Internet Connection]-[Network Connec-
tion] from the [Control Panel] window displayed.
2.
Select the [Optional Networking Components] in the [Advanced] menu.
3.
Check the [Other Network File and Print Services] box on.
4.
Click the [Details] button.
5.
Make sure that the [Print Services for Unix] is checked, and click the
[OK] button.
6.
Click the [Next] button.
7.
When [Disk Insertion] window is displayed, follow the instructions and
insert the Windows CD to the CD-ROM drive, and click the [OK] button.
Necessary files are copied.
Follow the procedures of "Adding a printer port" from the beginning again and activate [Add Printer Wizard].
(p.559) Creating a printer port on Windows 2000
Reference
(p.561) Creating a printer port on Windows XP
Reference
Chapter 21 Printing by LPD/LPR from Windows NT
563
4.0/2000/XP