Kyocera KM-8530 User Manual page 263

To re-set a Job ID
Compliant
PCL5e
Re-set a [Job ID] and a [Password] that confirm and specify a print job saved into a hard disk, when the Kyo-
ceramita PCL5e printer driver is used. When [Job ID] and a [Password] are re-set, they are used to save
images. The [Password] is the same as that of the confidential output.
Some application softwares save the settings of the printer driver. When printing with [Pass-
word Print Settings] set on shared file on the network or on a file other people may use, delete
[Job ID] and [Password] before saving the file.
●
Operating procedures of
1.
Open [Paper] tab of the [Properties] window.
When displayed from an application with Windows 98.
2.
Click the [Settings] button.
The [Password Print] dialog box will appear.
The details of existing settings will appear.
A password set in the [Paper] tab - [Settings] button - [Password Print] dialog box, and a password set in the [POD]
tab - [Image Storage] check box - [Job Combination Print Storage] dialog box are saved as one password. A pass-
word that is set later takes precedence over those saved previously.
(p.256) To print with protection by a password
Reference
3.
Confirm the [Job ID] and [Password].
PCL5e
263
Chapter 5 Printing from Windows