How To Read This Manual - Kyocera KM-8530 User Manual

How to read this Manual

PCL5e
Adobe PS3
Two types of printer
drevers, PCL5e Printer
Drever, are explained in
this document. Shows
about which printer
drever explained.
Describes operating
procedures.
Describes status of
hardware and software
when an operation is
done.
[ ] are used for the terms
displayed on the
Shows an object and feature of a procedure.
To perfo r m test print i ng t o check the c urrent setting
To perform test printing to check the current setting
Compliant (Wait with Proof)
PCL5e Adobe PS3
In this printing system, you can check test printing output and check current setting from the control panel.
Use this when printing a large volume, such as multiple sets of page.
Operating procedures of
PCL5e
Limitation
[Wait with Proof] cannot be set in the following case.
• When [Collate] is not available in [Paper] tab
If you attempt to make a setting corresponding to the combination as shown above that cannot
be set on the printer driver, a message will be displayed. Check the details of message and
adjust the relationship with other settings.
1.
Display the [Paper] tab of the [Properties] window.
When displayed from the application of Windows 98.
2.
From the list shown in the [Features] field, select [Wait Mode].
318
This page does not exist in the document.
23
This document contains
column spaces in the
body. Types of columns
shown in this way are as
follows.
Explains cautions and
restrictions or operating
hardware and software.
Expalains function
principles and other
functions that cannnot
be used together.
Explains impertant
notices on operating
procedures.
Explanations to
supplement the body.
Memoes may be
included in the body.
Shows a page to refer.
Refer to if necessary.
References may be
Section 2 How to Print
included in the body.
Hints and Advices on
operating procedures.