Kyocera KM-8530 User Manual page 443

Setting of Destinations (FTP) (Continued)
[Capital/Small] key
Touching this key replaces an upper case letter with a lower case and vice versa.
[Sign] key
Touch this key and the lowercase alphabetical letter keys produce signs. (The [Sign] key is changed to
the [Alphabet] key.) Touch this key again and you can enter alphabetical letters as before.
[PORT NO.] key
Touching this key opens the [FTP Port No.Input] screen at which you can enter the port number for an
FTP server.
[ ] keys
Touching these keys moves the cursor. Letters enter to the left of the cursor.
[ENTRY] key
Touch this key to register information you have entered and return to the [Select Transmission Object]
screen (FTP).
To change or delete registered Destinations/Storage Locations, use the Key Operator mode or the WWW Server
Function of the copier. For more detailed information, refer to the "Copier's User's Manual."
[CANCEL] key
Touching this key brings you back to the [Select Transmission Object] screen (FTP) without registering
what you have entered.
[OK] key
Touching this key opens the [Scanner Setting Basic] screen.
[FTP Port No.Input] screen
FTP Port No.
Here you can enter the port number for an FTP server using the touch panel. Any number can be up to 5
digits long.
[RESET] key
Touching this key clears the entered numbers, restoring the display to the default port number: 21.
[CANCEL] key
Touching this key brings you back to the [Select Transmission Object] screen (FTP) or the [Transmission
Address Input] screen (FTP) without registering what you have entered.
[OK] key
Touching this key stores in memory the port number you entered, bringing you back to the [Select Trans-
mission Object] screen (FTP) or the [Transmission Address Input] screen (FTP).
Chapter 11 Configuring Destination/Storage Loca-
443
tion Settings