Displaying Switch Configuration - 3Com E4500-24 Cli Configuration Manual

You can specify a configuration file to be used for the next startup and configure the main/backup
attribute for the configuration file.
Assigning main attribute to the startup configuration file
If you save the current configuration to the main configuration file, the system will automatically set
the file as the main startup configuration file.
You can also use the startup saved-configuration cfgfile [ main ] command to set the file as main
startup configuration file.
Assigning backup attribute to the startup configuration file
If you save the current configuration to the backup configuration file, the system will automatically
set the file as the backup startup configuration file.
You can also use the startup saved-configuration cfgfile backup command to set the file as
backup startup configuration file.
The configuration file must use .cfg as its extension name and the startup configuration file must be
saved at the root directory of the switch.

Displaying Switch Configuration

To do...
Display the initial configuration
file saved in the Flash of a
switch
Display the configuration file
used for this and next startup
Display the current VLAN
configuration of the switch
Display the validated
configuration in current view
Display current configuration
Use the command...
display saved-configuration [ unit unit-id ]
[ by-linenum ]
display startup [ unit unit-id ]
display current-configuration vlan
[ vlan-id ] [ by-linenum ]
display this [ by-linenum ]
display current-configuration
[ configuration [ configuration-type ] |
interface [ interface-type ]
[ interface-number ] ] [ by-linenum ] [ | { begin
| exclude | include } regular-expression ]
1-5
Remarks
Available in any
view.