Configuration Example - 3Com E4500-24 Cli Configuration Manual

To do...
Set the commands to be
executed automatically
after a user login to the
user interface successfully
Make terminal services
available
Set the maximum number
of lines the screen can
contain
Set the history command
buffer size
Set the timeout time of the
user interface
When the authentication mode is password, the command level available to users logging in to the user
interface is determined by the user privilege level command.

Configuration Example

Network requirements
Assume current user logins through the console port and the current user level is set to the
administrator level (level 3). Perform the following configurations for users logging in to VTY 0 using
Telnet.
Authenticate users using the local password.
Set the local password to 123456 (in plain text).
Commands of level 2 are available to the users.
Telnet protocol is supported.
The screen can contain up to 30 lines.
The history command buffer can contain up to 20 commands.
The timeout time of VTY 0 is 6 minutes.
Use the command...
auto-execute command text
shell
screen-length screen-length
history-command max-size
value
idle-timeout minutes
[ seconds ]
3-6
Remarks
Optional
By default, no command is executed
automatically after a user logs into the
user interface.
Optional
By default, terminal services are
available in all user interfaces.
Optional
By default, the screen can contain up
to 24 lines.
You can use the screen-length 0
command to disable the function to
display information in pages.
Optional
The default history command buffer
size is 10. That is, a history command
buffer can store up to 10 commands
by default.
Optional
The default timeout time of a user
interface is 10 minutes.
With the timeout time being 10
minutes, the connection to a user
interface is terminated if no operation
is performed in the user interface
within 10 minutes.
You can use the idle-timeout 0
command to disable the timeout
function.