3Com E4500-24 Cli Configuration Manual page 582

Network diagram
Figure 1-4 Network diagram for HGMP cluster configuration
FTP/TFTP Server
63.172 .55.1
Management
device
Eth 1/0/3
Eth 1/0/1
Cluster
Member device
MAC: 000f.e201. 0011
Configuration procedure
1) Configure the member devices (taking one member as an example)
# Enable NDP globally and on Ethernet 1/0/1.
<Sysname> system-view
[Sysname] ndp enable
[Sysname] interface Ethernet 1/0/1
[Sysname-Ethernet1/0/1] ndp enable
[Sysname-Ethernet1/0/1] quit
# Enable NTDP globally and on Ethernet 1/0/1.
[Sysname] ntdp enable
[Sysname] interface Ethernet 1/0/1
[Sysname-Ethernet1/0/1] ntdp enable
[Sysname-Ethernet1/0/1] quit
# Enable the cluster function.
[Sysname] cluster enable
2) Configure the management device
# Add port Ethernet 1/0/1 to VLAN 2.
<Sysname> system-view
[Sysname] vlan 2
[Sysname-vlan2] port Ethernet 1/0/1
[Sysname-vlan2] quit
# Configure the IP address of VLAN-interface 2 as 163.172.55.1.
[Sysname] interface Vlan-interface 2
[Sysname-Vlan-interface2] ip address 163.172.55.1 255.255.255.0
[Sysname-Vlan-interface2] quit
# Disable NDP on the uplink port Ethernet 1/0/1.
Internet
SNMP/logging host(NMS)
Eth 1/0/1
69.172.55.4
VLAN-interface 2
163.172 .55.1
Eth 1/0/2
Eth 1/0/1
Member device
MAC: 000f. e201. 0012
1-21