Console Port Login Configuration With Authentication Mode Being None; Configuration Procedure - 3Com E4500-24 Cli Configuration Manual

Authentication
mode
Scheme
Changes made to the authentication mode for console port login takes effect after you quit the
command-line interface and then log in again.
Console Port Login Configuration with Authentication Mode Being
None

Configuration Procedure

Follow these steps to configure console port login with the authentication mode being none:
To do...
Enter system view
Enter AUX user interface view
Configure not to authenticate
users
Configure
Set the baud
the console
rate
port
Console port login configuration
Specify to AAA configuration
perform local specifies whether to
authentication or perform local
remote RADIUS authentication or RADIUS
authentication authentication
Configure user Configure user names and
name and passwords for
password local/RADIUS users
Manage AUX Set service type for AUX
users users
Perform Perform common
common configuration for console
configuration port login
Use the command...
system-view
user-interface aux 0
authentication-mode
none
speed speed-value
2-5
Remarks
Optional
Local authentication is
performed by default.
Refer to the AAA part for
more.
Required
The user name and
password of a local user
are configured on the
switch.
The user name and
password of a RADIUS
user are configured on the
RADIUS server. Refer to
user manual of RADIUS
server for more.
Required
Optional
Refer to Table
Remarks
—
—
Required
By default, users logging in through
the console port (AUX user interface)
are not authenticated.
Optional
The default baud rate of a console
port is 19,200 bps.
2-2.