Ftp Configuration: A Switch Operating As An Ftp Client - 3Com E4500-24 Cli Configuration Manual

Figure 1-3 Process of displaying a shell banner
Follow these steps to configure the banner display for an FTP server:
To do...
Enter system view
Configure a login banner
Configure a shell banner
For details about the header command, refer to the Login part of the manual.
Displaying FTP server information
Display the information about FTP server
configurations on a switch
Display the source IP address set for an FTP
server
Display the login FTP client on an FTP server

FTP Configuration: A Switch Operating as an FTP Client

Basic configurations on an FTP client
By default a switch can operate as an FTP client. In this case, you can connect the switch to the FTP
server to perform FTP-related operations (such as creating/removing a directory) by executing
commands on the switch.
Follow these steps to perform basic configurations on an FTP client:
Use the command...
system-view
header login text
header shell text
To do...
—
Required
Use either command or both.
By default, no banner is
configured.
Use the command...
display ftp-server
display ftp-server source-ip
display ftp-user
1-6
Remarks
Remarks
Available in any
view