Configuring A Mac Address Entry - 3Com E4500-24 Cli Configuration Manual

Enabling Destination MAC Address Triggered Update

Configuring a MAC Address Entry

You can add, modify, or remove a MAC address entry, remove all MAC address entries concerning a
specific port, or remove specific type of MAC address entries (dynamic or static MAC address entries).
Adding a MAC address entry in system view
You can add a MAC address entry in either system view or Ethernet port view.
Follow these steps to add a MAC address entry in system view:
To do...
Enter system view
Add a MAC address
entry
When you add a MAC address entry, the port specified by the interface argument must belong to
the VLAN specified by the vlan argument in the command. Otherwise, you will fail to add this MAC
address entry.,By default, all ports belong to VLAN 1.
If the VLAN specified by the vlan argument is a dynamic VLAN, after a static MAC address is
added, it will become a static VLAN.
Adding a MAC address entry in Ethernet port view
Follow these steps to add a MAC address entry in Ethernet port view:
To do...
Enter system view
Enter Ethernet port view
Add a MAC address entry
Task
Use the command...
system-view
mac-address { static | dynamic | blackhole }
mac-address interface interface-type
interface-number vlan vlan-id
Use the command...
system-view
interface interface-type
interface-number
mac-address { static |
dynamic | blackhole }
mac-address vlan vlan-id
1-5
Remarks
Optional
Remarks
—
Required
Remarks
—
—
Required