3Com E4500-24 Cli Configuration Manual page 108

# Configure GigabitEthernet 1/0/1 to operate in automatic voice VLAN assignment mode. (Optional. By
default, a port operates in automatic voice VLAN assignment mode.)
[DeviceA] interface gigabitethernet 1/0/1
[DeviceA-GigabitEthernet1/0/1] voice vlan mode auto
# Configure GigabitEthernet 1/0/1 as a hybrid port.
[DeviceA-GigabitEthernet1/0/1] port link-type hybrid
# Configure VLAN 2 as the voice VLAN for GigabitEthernet 1/0/1.
[DeviceA-GigabitEthernet1/0/1] voice vlan enable
[DeviceA-GigabitEthernet1/0/1] quit
# Configure GigabitEthernet 1/0/2.
[DeviceA] interface gigabitethernet 1/0/2
[DeviceA-GigabitEthernet1/0/2] voice vlan mode auto
[DeviceA-GigabitEthernet1/0/2] port link-type access
Please wait... Done.
[DeviceA-GigabitEthernet1/0/2] port link-type hybrid
[DeviceA-GigabitEthernet1/0/2] voice vlan enable
Verification
# Display the OUI addresses, OUI address masks, and description strings supported currently.
<DeviceA> display voice vlan oui
Oui Address Mask
0003-6b00-0000 ffff-ff00-0000
000f-e200-0000 ffff-ff00-0000
0011-1100-0000 ffff-ff00-0000
0011-2200-0000 ffff-ff00-0000
00d0-1e00-0000 ffff-ff00-0000
00e0-7500-0000 ffff-ff00-0000
00e0-bb00-0000 ffff-ff00-0000
# Display the current states of voice VLANs.
<DeviceA> display voice vlan state
Voice Vlan status: ENABLE
Voice Vlan ID: 2
Voice Vlan security mode: Security
Voice Vlan aging time: 1440 minutes
Current voice vlan enabled port mode:
PORT
----------------------------------------
GigabitEthernet1/0/1
GigabitEthernet1/0/2
Description
Cisco phone
H3C Aolynk phone
IP phone A
IP phone B
Pingtel phone
Polycom phone
3Com phone
MODE
AUTO
AUTO
1-12