Ip Address Configuration Examples; Ip Address Configuration Example Ii; Ip Address Configuration Example Ii - 3Com E4500-24 Cli Configuration Manual

IP Address Configuration Examples

IP Address Configuration Example I
Network requirement
Assign IP address 129.2.2.1 with mask 255.255.255.0 to VLAN-interface 1 of the switch.
Network diagram
Figure 1-3 Network diagram for IP address configuration
Configuration procedure
# Configure an IP address for VLAN-interface 1.
<Switch> system-view
[Switch] interface Vlan-interface 1
[Switch-Vlan-interface1] ip address 129.2.2.1 255.255.255.0

IP Address Configuration Example II

Network requirements
As shown in Figure
172.16.1.0/24 and 172.16.2.0/24.
To enable the hosts on the two network segments to communicate with the external network through the
switch, and the hosts on the LAN can communicate with each other, do the following:
Assign two IP addresses to VLAN-interface 1 on the switch.
Set the switch as the gateway on all PCs of the two networks.
1-4, VLAN-interface 1 on a switch is connected to a LAN comprising two segments:
1-5