Displaying And Maintaining Lldp; Lldp Configuration Examples; Lldp Basic Configuration Example - 3Com E4500-24 Cli Configuration Manual

To do...
Enable LLDP trap sending
Quit to system view
Set the interval to send LLDP
traps

Displaying and Maintaining LLDP

To do...
Display the global LLDP
information or the information
contained in the LLDP TLVs to
be sent through a port
Display the information
contained in the LLDP TLVs
received through a port
Display LLDP statistics
Display LLDP status of a port
Display the types of the LLDP
TLVs that are currently sent

LLDP Configuration Examples

LLDP Basic Configuration Example

Network requirements
The NMS and Switch A are located in the same Ethernet. An MED device and Switch B are
connected to GigabitEthernet 1/0/1 and GigabitEthernet 1/0/2 of Switch A.
Enable LLDP on the ports of Switch A and Switch B to monitor the link between Switch A and
Switch B and the link between Switch A and the MED device on the NMS.
Use the command...
lldp notification remote-change
enable
quit
lldp timer notification-interval value
Use the command...
display lldp local-information
[ global | interface interface-type
interface-number ]
display lldp neighbor-information
[ interface interface-type
interface-number ] [ brief ]
display lldp statistics [ global |
interface interface-type
interface-number ]
display lldp status [ interface
interface-type interface-number ]
display lldp tlv-config [ interface
interface-type interface-number ]
1-10
Remarks
Required
, the
configuration applies to the
current port only.
Disabled by default
—
Optional
5 seconds by default
Remarks
Available in any view
Available in any view
Available in any view
Available in any view
Available in any view