Vlan; Displaying Switch Configuration - 3Com 4500 Configuration Manual

The configuration file must use .cfg as its extension name and the startup configuration file must be
saved at the root directory of the switch.

Displaying Switch Configuration

To do...
Display the initial configuration
file saved in the Flash of a
switch
Display the configuration file
used for this and next startup
Display the current VLAN
configuration of the switch
Display the validated
configuration in current view
Display current configuration
Use the command...
display saved-configuration [ unit unit-id ]
[ by-linenum ]
display startup [ unit unit-id ]
display current-configuration vlan
[ vlan-id ] [ by-linenum ]
display this [ by-linenum ]
display current-configuration
[ configuration [ configuration-type ] |
interface [ interface-type ]
[ interface-number ] ] [ by-linenum ] [ | { begin
| exclude | include } regular-expression ]
1-5
Remarks
Available in any
view.