Configuring Bims Server Information For The Dhcp Client; Configuring Option 184 Parameters For The Client With Voice Service - 3Com E4500-24 Cli Configuration Manual

Follow these steps to configure WINS servers for the DHCP client:
To do...
Enter system view
Configure
WINS server
addresses for
DHCP clients
Configure a
NetBIOS
node type for
DHCP clients
If b-node is specified for the client, you don't need to specify any WINS server address.

Configuring BIMS Server Information for the DHCP Client

A DHCP client performs regular software update and backup using configuration files obtained from a
BIMS server. Therefore, the DHCP server needs to offer DHCP clients the BIMS server IP address, port
number, shared key from the DHCP address pool.
Follow these steps to configure BIMS server information for the DHCP client:
To do...
Enter system view
Configure the BIMS server
information to be assigned to
the DHCP client

Configuring Option 184 Parameters for the Client with Voice Service

For details about Option 184, refer to
Service.
system-view
interface interface-type interface-number
Configure the
current dhcp server nbns-list ip-address&<1-8>
interface
quit
Configure
dhcp server nbns-list ip-address&<1-8>
multiple
{ interface interface-type interface-number [ to
interfaces in
interface-type interface-number ] | all }
system view
interface interface-type interface-number
Configure the
dhcp server netbios-type { b-node | h-node |
current
m-node | p-node }
interface
quit
Configure dhcp server netbios-type { b-node | h-node |
multiple m-node | p-node } { interface interface-type
interfaces in interface-number [ to interface-type
system view
interface-number ] | all }
system-view
dhcp server bims-server ip
ip-address [ port port-number ]
sharekey key { interface interface-type
interface-number [ to interface-type
interface-number ] | all }
Configuring Option 184 Parameters for the Client with Voice
Use the command...
Use the command...
2-21
Remarks
—
Required
By default, no
WINS server
address is
configured.
Required
By default, no
NetBIOS node
type is specified.
Remarks
—
Required
By default, no BIMS
server information is
configured.