3Com E4500-24 Cli Configuration Manual page 10

Available
View
operation
Configure user
User interface
interface
view
parameters
FTP client Configure FTP
view client parameters
SFTP client Configure SFTP
view client parameters
MST region Configure MST
view region parameters
Configure cluster
Cluster view
parameters
Configure the RSA
public key for SSH
users
Public key
view
Configure the RSA
or DSA public key
for SSH users
Edit the RSA public
key for SSH users
Public key
Edit the RSA or
editing view
DSA public key for
SSH users
Configure RIP
RIP view protocol
parameters
Routing policy Configure routing
view policy
Define rules for a
Basic ACL basic ACL (with ID
view ranging from 2000
to 2999)
Define rules for an
Advanced advanced ACL
ACL view (with ID ranging
from 3000 to 3999)
Define rules for an
Layer 2 ACL layer 2 ACL (with
view ID ranging from
4000 to 4999)
Prompt example
Execute the
user-interface
[Sysname-ui-aux0]
command in
system view.
Execute the ftp
[ftp] command in user
view.
Execute the sftp
sftp-client> command in
system view.
Execute the stp
[Sysname-mst-regi region-configurati
on] on command in
system view.
Execute the
[Sysname-cluster] cluster command
in system view.
Execute the rsa
[Sysname-rsa-publ peer-public-key
ic-key] command in
system view.
Execute the
[Sysname-peer-pu public-key peer
blic-key] command in
system view.
[Sysname-rsa-key-
code] Execute the
public-key-code
begin command in
[Sysname-peer-ke
public key view.
y-code]
Execute the rip
[Sysname-rip] command in
system view.
Execute the
[Sysname-route-p route-policy
olicy] command in
system view.
Execute the acl
[Sysname-acl-
number command
basic-2000]
in system view.
Execute the acl
[Sysname-acl-adv-
number command
3000]
in system view.
Execute the acl
[Sysname-acl-ethe
number command
rnetframe-4000]
in system view.
1-9
Enter method Quit method
Execute the
peer-public-ke
y end
command to
return to system
view.
Execute the
public-key-cod
e end
command to
return to public
key view.
Execute the
quit command
to return to
system view.
Execute the
return
command to
return to user
view.