Ins Alla Ion - Creative SOUND BLASTER PRO User Reference Manual

SOUNDBLASTER^
tv
Juniper
Locations and
Settings
The following illus ra ion shows he loca ion and defaul jumper se ings
for I/O address, DMA channel and IRQ in errup .
Note: To enable DMA Sharing,
remove jumper from pins 1 & 2
and place It across pins 2 & 3.
Share DMA Jumper
Default - Non-Share
Joystlck/MIDI
Adaptor Plug
Note: When changing DMA
Channel, both DRQ and DACK
jumpers must be moved to the
correct pins.
Caution
Tes Snug <Cas°dl
Ins alla ion
The built-in stereo power amplifier has a maximum output power of four
watts per channel withfour-ohm speakers and two watts per channel with
eight-ohm speakers. Do not play at maximum volume if your speaker
cannot handle this power.
To es Sound Blas er Pro ins alla ion:
1. Place Sound Blas er Pro Disk # 1 in your floppy drive and from
he A: or B: promp , ype TEST-SBP.
2. Follow he on-screen ins ruc ions.
This program es s he Sound Blas er Pro's basic hardware configura ion:
I/O address, in errup and DMA channel. The program iden ifies he
curren hardware configura ion hen displays a menu o le you es bo h
voice and music ou pu .
Installation 2-5