Xerox Wide Format 6705 System Manual page 477

DC361 System Data Save/Restore
<Sub System>
IIT CP-Cont
- -
<Function>
Saves the NVM Data of the IOT in the HDD or writes the data that was saved in the HDD
into the NVM of the IOT.
<Operation Procedure>
Saving Data to HDD (NVM -> HDD)
1. Select [Save] and select [Start].
2. On the confirmation screen, select [Yes].
Note Select [No] to return to the previous screen.
6.4 Service Mode
Chapter 6 General
IOT
O
Writing Data to NVM (HDD -> NVM)
1. Select [Restore] and select [Start].
2. On the confirmation screen, select [Yes].
Note Select [No] to return to the previous screen.
6-97