Tools - CPS COLOR COROB D200 Technical Manual

1-6

1.5 Tools

List of suggested tools required to operate with COROB™ equipment.
Mechanical Tools
Description
All-purpose Toolbox
Electrical Tools
Other
Type
Complete with all frequently used tools:
Wrenches 6x7 - 8x9 - 10x11 - 12x13 - 14x15 - 16x17 - 18x19 - 20x22 - 21x23 -
24x27 - 25x28 - 30x32 (mm) - size 14 and 17 must be shortened
Socket Wrenches: complete set
Torque Wrench: 17 mm
90° Hexagonal Wrench: 12-pcs set (from 2 to 10 mm)
T-Shaped Hexagonal Wrench: 2 - 2.5 - 3 - 4 - 5 - 6 (mm)
Pliers Combination pliers, 180 mm
Flat long nose pliers with straight jaws, 160 mm
Box-joint adjustable pliers
Pliers with straight nose for internal circlips (19 to 60 mm)
Pliers with straight nose for external circlips (19 to 60 mm)
Diagonal cutting nippers
Screwdrivers (-) for slot-head screws: 0.6x3.5x100 mm - 1x5.5x150 mm
(+) for Phillips screws: 1x80 mm - 2x100 mm
reversible (+) (-): 0.8x6x30 mm
Precision screwdrivers (+) (-): complete set
Scissors 130 mm - Utility Knife 165 mm - Hacksaw, small size - Half-round file, medium
size - Tube cutter - Olier 30 cc - Pocket tape ruler 2 m - Hammer 400 gr - Rubber Hammer
Ø 35 mm - Teflon® Tape
Digital Multimeter, to test Voltage, Resistance and Current values
–
Pressure transducer, to measure pressure values in the circuit
–
Laptop computer
–
Precision Scale, with 3 decimal digits
–
Picnometer, to measure specific weight of colorants
–
COROB™ AUTOMATIC DISPENSERS