Software Installation; Machine Configuration - CPS COLOR COROB D200 Technical Manual

5-6

5.4 Software installation

Load the management application program onto your computer.
1. Turn on computer and monitor.
2. Power up and start the machine.
3. When the computer is booted up, install the dispensing application program as well as the configuration
and calibration program CorobTECH (see the programs user's manual).

5.5 Machine configuration

To configure the machine, the easiest way is to follow the step-by-step procedure provided by CorobTECH
called Dispenser Wizard.
For more detailed information, refer to the CorobTECH user's manual.
Each canister
circuit. No matter if it is a 2.5 l or
5 l, sequential or simultaneous, with
single or double pump.
COROB™ AUTOMATIC DISPENSERS
is one