Moistening The Cap Sponge - CPS COLOR COROB D200 Technical Manual

5-12

5.8 Moistening the cap sponge

Installation now requires that you insert the sponge in the humidifier cap and moisten it for the first time.
The sponge is available among the material supplied.
The sponge serves to keep the dispensing nozzle center at a moisture level to prevent the colorant from
drying out.
If the colorants are water-based or universal, use water.
If the colorant are solvent-based, use a solvent compatible with the colorant and with a good
evaporation. The dispensing nozzles are not in direct contact with the solvent, but they are kept
moistened by the saturated atmosphere inside the cap.
COROB™ AUTOMATIC DISPENSERS