Setting Advanced Options For The Cisco Secure Acs User Interface - Cisco 2509 - Router - EN User Manual

Advanced Options
Setting Advanced Options for the Cisco Secure ACS User
Interface
Step 1
Step 2
Caution
User Guide for Cisco Secure ACS for Windows Server
3-6
Network Device Groups—When selected, this option enables network
•
device groups (NDGs). When NDGs are enabled, the Network Configuration
section and parts of the User Setup and Group Setup pages change to enable
you to manage groups of network devices (AAA clients or AAA servers).
This feature is useful if you have many devices to administer.
Voice over IP (VoIP) Group Settings—When selected, this feature enables
•
the VoIP option on the Group Setup page.
Voice-over-IP (VoIP) Accounting Configuration—When selected, this
•
feature enables the VoIP Accounting Configuration option on the System
Configuration page. This option is used to determine the logging format of
RADIUS VoIP accounting packets.
ODBC Logging—When selected, this feature enables the ODBC logging
•
sections on the Logging page of the System Configuration section.
To set advanced options for the Cisco Secure ACS HTML interface, follow these
steps:
Click Interface Configuration, and then click Advanced Options.
Result: The Advanced Options table appears.
Select each option that you want displayed (enabled) in the Cisco Secure ACS
HTML interface.
Disabling an advanced feature in the Interface Configuration section does not
affect anything except the display of that feature in the HTML interface. Settings
made while an advanced feature was displayed remain in effect when that
advanced feature is no longer displayed. Further, the interface displays any
advanced feature that has non-default settings, even if you have configured that
advanced feature to be hidden. If you later disable the feature or delete its settings,
Cisco Secure ACS hides the advanced feature. The only exception is the Network
Device Groups feature. Regardless of whether Network Device Groups are in use,
they are hidden when deselected on the Advanced Options page.
Chapter 3 Setting Up the Cisco Secure ACS HTML Interface
78-14696-01, Version 3.1