Configuring A Shell Command Authorization Set For A User - Cisco 2509 - Router - EN User Manual

Chapter 7 Setting Up and Managing User Accounts
Step 6

Configuring a Shell Command Authorization Set for a User

78-14696-01, Version 3.1
Do one of the following:
If you are finished configuring the user account options, click Submit to
•
record the options.
To continue to specify the user account options, perform other procedures in
•
this chapter, as applicable.
Use this procedure to specify the shell command authorization set parameters for
a user. You can choose one of five options:
None—There is no authorization for shell commands.
•
• Group—For this user, the group-level shell command authorization set
applies.
• Assign a Shell Command Authorization Set for any network device—One
shell command authorization set is assigned, and it applies all network
devices.
Assign a Shell Command Authorization Set on a per Network Device
•
Group Basis—Particular shell command authorization sets are to be
effective on particular NDGs. When you select this option, you create the
table that lists what NDG associates with what shell command authorization
set.
• Per User Command Authorization—Enables you to permit or deny specific
Cisco IOS commands and arguments at the user level.
Before You Begin
Ensure that a AAA client has been configured to use TACACS+ as the
•
security control protocol.
In the Advanced Options section of Interface Configuration, ensure that the
•
Per-user TACACS+/RADIUS Attributes check box is selected.
Advanced User Authentication Settings
User Guide for Cisco Secure ACS for Windows Server
7-25