Deleting A Command Authorization Set - Cisco 2509 - Router - EN User Manual

Command Authorization Sets
Step 5
Step 6

Deleting a Command Authorization Set

Step 1
Step 2
Step 3
Step 4
Step 5
User Guide for Cisco Secure ACS for Windows Server
5-20
If additional boxes appear below the Name and Description boxes, you can do any
or all of the following:
To change the set Name or Description, edit the words in the corresponding
•
box.
• To remove a command from the set, from the Matched Commands list, select
the command, and then click Remove Command.
• To edit arguments of a command, from the command list box, select the
command and then type changes to the arguments in the box to the right of
the command list box.
When you finish editing the set, click Submit.
To delete a command authorization set, follow these steps:
In the navigation bar, click Shared Profile Components.
Result: The Shared Profile Components page lists the command authorization set
types available.
Click a command authorization set type, as applicable.
Result: The selected Command Authorization Sets table appears.
From the Name column, click the name of the command set you want to delete.
Result: Information for the selected set appears on the applicable Command
Authorization Set page.
Click Delete.
Result: A dialog box warns you that you are about to delete a command
authorization set.
To confirm that you want to delete that command authorization set, click OK.
Result: Cisco Secure ACS displays the applicable Command Authorization Sets
table. The command authorization set is no longer listed.
Chapter 5 Setting Up and Managing Shared Profile Components
78-14696-01, Version 3.1