Generating A Certificate Signing Request - Cisco 2509 - Router - EN User Manual

Cisco Secure ACS Certificate Setup
Step 1
Step 2
Step 3
Warning
Step 4
Step 5

Generating a Certificate Signing Request

Note
User Guide for Cisco Secure ACS for Windows Server
8-78
To edit the CTL, follow these steps:
In the navigation bar, click System Configuration.
Click Cisco Secure ACS Certificate Setup.
Click Edit Certificate Trust List.
Result: The Edit the Certificate Trust List (CTL) table appears.
Adding a public CA, which you do not control, to your CTL, may reduce your
system security.
To configure a CA on your CTL as trusted, select the corresponding check box.
You can select, or deselect, as many CAs as you want. Deselecting a CA's
Tip
check box configures the CA as not trusted.
Click Submit.
Result: Cisco Secure ACS configures the specified CA (or CAs) as trusted or not
trusted in accordance with selecting or deselecting check boxes.
You can use Cisco Secure ACS to generate a certificate signing request (CSR).
After you generate a CSR, you can submit it to a certificate authority (CA) to
obtain your certificate. You perform this procedure to generate the CSR for future
use with a certificate enrollment tool.
If you already have a server certificate, you do not need to use this portion of the
ACS Certificate Setup page.
Chapter 8 Establishing Cisco Secure ACS System Configuration
78-14696-01, Version 3.1