Configuring The Unknown Service Setting For A User - Cisco 2509 - Router - EN User Manual

Advanced User Authentication Settings
Step 7

Configuring the Unknown Service Setting for a User

Step 1
Step 2
Step 3
Step 4
User Guide for Cisco Secure ACS for Windows Server
7-32
Do one of the following:
If you are finished configuring the user account options, click Submit to
•
record the options.
To continue to specify the user account options, perform other procedures in
•
this chapter, as applicable.
If you want TACACS+ AAA clients to permit unknown services, you can select
the Default (Undefined) Services check box under Checking this option will
PERMIT all UNKNOWN Services.
To configure the Unknown Service setting for a user, follow these steps:
Perform Step 1 through Step 3 of
Result: The User Setup Edit page opens. The username being added or edited is
at the top of the page.
Scroll down to the table under the heading Checking this option will PERMIT all
UNKNOWN Services.
To allow TACACS+ AAA clients to permit unknown services for this user, select
the Default (Undefined) Services check box.
Do one of the following:
• If you are finished configuring the user account options, click Submit to
record the options.
To continue to specify the user account options, perform other procedures in
•
this chapter, as applicable.
Chapter 7 Setting Up and Managing User Accounts
Adding a Basic User Account, page 7-5.
78-14696-01, Version 3.1