Cisco 2509 - Router - EN User Manual page 405

Chapter 10 Setting Up and Managing Administrators and Policy
Step 6 If you want to allow Cisco Secure ACS to use any valid TCP port for
administrative sessions, either local or remote, under HTTP Port Allocation,
select the Allow any TCP ports to be used for Administration HTTP Access
option.
If you want to allow Cisco Secure ACS to use only a specified range of TCP ports
Step 7
for administrative sessions, follow these steps:
a.
b.
c.
Step 8 If you want to enable SSL encryption of administrator access to the HTML
interface, under Secure Socket Layer Setup, select the Use HTTPS Transport for
Administration Access check box.
Note
Step 9 Click Submit.
Result: Cisco Secure ACS saves and begins enforcing the access policy settings.
If you have enabled SSL, at the next administrator login, Cisco Secure ACS
begins using HTTPS. Any current administrator sessions are unaffected.
78-14696-01, Version 3.1
The IP addresses entered to define a range must differ only in the last
Note
octet.
Under HTTP Port Allocation, select the Restrict Administration Sessions to
the following port range From Port X to Port Y option.
In the X box type the lowest TCP port (up to 5 characters) in the range.
In the Y box type the highest TCP port (up to 5 characters) in the range.
To enable SSL, you must have completed the steps in
Cisco Secure ACS Server Certificate, page
Certificate Authority Certificate, page
User Guide for Cisco Secure ACS for Windows Server
Access Policy
Installing a
8-74, and Adding a
8-76.
10-15